S3 Compatibility

The Storj S3-compatible Gateway supports a RESTful API that is compatible with the basic data access model of the Amazon S3 API.

Compatibility Table

Name	Support	Caveats
AbortMultipartUpload	Full
CompleteMultipartUpload	Full
CopyObject	Full
CreateBucket	Full
CreateMultipartUpload	Full
DeleteBucket	Full
DeleteBucketAnalyticsConfiguration	No
DeleteBucketCors	No
DeleteBucketEncryption	No
DeleteBucketIntelligentTieringConfiguration	No
DeleteBucketInventoryConfiguration	No
DeleteBucketLifecycle	No
DeleteBucketMetricsConfiguration	No
DeleteBucketOwnershipControls	No
DeleteBucketPolicy	No
DeleteBucketReplication	No
DeleteBucketTagging	No
DeleteBucketWebsite	No
DeleteObject	Full
DeleteObjectTagging	Full	Tags can be modified outside of tagging endpoints
DeleteObjects	Full
DeletePublicAccessBlock	No
GetBucketAccelerateConfiguration	No
GetBucketAcl	No
GetBucketAnalyticsConfiguration	No
GetBucketCors	No
GetBucketEncryption	No
GetBucketIntelligentTieringConfiguration	No
GetBucketInventoryConfiguration	No
GetBucketLifecycle (deprecated)	No
GetBucketLifecycleConfiguration	No
GetBucketLocation	Full	See GetBucketLocation section
GetBucketLogging	No	Available upon request; see Bucket Logging section below
GetBucketMetricsConfiguration	No
GetBucketNotification (deprecated)	No
GetBucketNotificationConfiguration	No
GetBucketOwnershipControls	No
GetBucketPolicy	Partial	Only in Gateway-ST with --website
GetBucketPolicyStatus	No	Currently, it always returns false
GetBucketReplication	No
GetBucketRequestPayment	No	Planned support status needs verification
GetBucketTagging	No
GetBucketVersioning	Yes	Object Versioning
GetBucketWebsite	No
GetObject	Partial	We need to add support for the partNumber parameter
GetObjectAcl	No
GetObjectLegalHold	Yes	Object Lock
GetObjectLockConfiguration	Yes	Object Lock
GetObjectRetention	Yes	Object Lock
GetObjectTagging	Full	Tags can be modified outside of tagging endpoints
GetObjectTorrent	No
GetPublicAccessBlock	No
HeadBucket	Full
HeadObject	Full
ListBucketAnalyticsConfigurations	No
ListBucketIntelligentTieringConfigurations	No
ListBucketInventoryConfigurations	No
ListBucketMetricsConfigurations	No
ListBuckets	Full
ListMultipartUploads	Partial	See ListMultipartUploads section
ListObjectVersions	Yes	Object Versioning
ListObjects	Partial	See ListObjects section
ListObjectsV2	Partial	See ListObjects section
ListParts	Full
PutBucketAccelerateConfiguration	No
PutBucketAcl	No
PutBucketAnalyticsConfiguration	No
PutBucketCors	No
PutBucketEncryption	No
PutBucketIntelligentTieringConfiguration	No
PutBucketInventoryConfiguration	No
PutBucketLifecycle (deprecated)	No
PutBucketLifecycleConfiguration	No
PutBucketLogging	No	Available upon request; see Bucket Logging section below
PutBucketMetricsConfiguration	No
PutBucketNotification (deprecated)	No
PutBucketNotificationConfiguration	No
PutBucketOwnershipControls	No
PutBucketPolicy	No
PutBucketReplication	No
PutBucketRequestPayment	No	Planned support status needs verification
PutBucketTagging	No
PutBucketVersioning	Yes	Object Versioning
PutBucketWebsite	No
PutObject	Full
PutObjectAcl	No
PutObjectLegalHold	Yes	Object Lock
PutObjectLockConfiguration	Yes	Object Lock
PutObjectRetention	Yes	Object Lock
PutObjectTagging	Full	Tags can be modified outside of tagging endpoints
PutPublicAccessBlock	No
RestoreObject	No
SelectObjectContent	No
UploadPart	Full
UploadPartCopy	No
WriteGetObjectResponse	No

Compatibility Table Support/Caveats

Definitions

Full compatibility

Full compatibility means that we support all features of a specific action except for features that rely on other actions that we haven't fully implemented.

Bucket Logging

Bucket Logging is available upon request. Please refer to Bucket Logging (Available Upon Request).

GetBucketLocation

This is currently supported in Gateway-MT only.

LocationConstraint

Specifies the placement region where the object data for a bucket is stored:

Value	Description
`global`	Stored on nodes connected to the global public network
`us-select-1`	Stored on infrastructure located in SOC 2 Type 2 certified facilities located in the continental United States of America

Partial compatibility

Partial compatibility means that we don't support all features of a specific action (see Caveats column).

A bucket's paths are end-to-end encrypted. We don't use an ordering-preserving encryption scheme yet, meaning that it's impossible to always list a bucket in lexicographical order (as per S3 specification). For requests that come with forward-slash-terminated prefix and/or forward-slash delimiter, we list in the fastest way we can, which will list a bucket in lexicographical order, but for encrypted paths (which is often very different from the expected order for decrypted paths). Ideally, clients shouldn't care about ordering in those cases. For requests that come with non-forward-slash-terminated prefix and/or non-forward-slash delimiter, we perform exhaustive listing, which will filter paths gateway-side. In this case, gateways return listing in lexicographical order. Forcing exhaustive listing for any request is not possible for Storj production deployments of Gateway-MT, and for, e.g. Gateway-ST can be achieved with --s3.fully-compatible-listing.

ListMultipartUploads

This endpoint has the same ordering characteristics as ListObjects described above, in that lexicographic ordering works on encrypted upload paths, not the decrypted uploads paths. It also only supports prefixes that contain a trailing forward-slash, as well as a forward-slash delimiter. An exhaustive search similar to what ListObjects does with arbitrary prefixes and delimiters is not supported.

UploadIdMarker and NextUploadIdMarker are not supported. This is used to filter out uploads that come before the given upload ID marker. This is tracked at storj/gateway-mt#213

Secure access control in the decentralized cloud is a good read for why we don't support ACL-related actions.

Limits

Limit	Specification
Maximum number of buckets	100
Maximum number of objects per bucket	No limit
Maximum object size	No limit
Minimum object size	0 B
Maximum object size per PUT operation	No limit
Maximum number of parts per upload	10000
Minimum part size	5 MiB. Last part can be 0 B
Maximum number of parts returned per list parts request	10000
Maximum number of objects returned per list objects request	1000
Maximum number of multipart uploads returned per list multipart uploads request	1000
Maximum length for bucket names	63
Minimum length for bucket names	3
Maximum length for encrypted object names	1280
Maximum metadata size	2 KiB

S3-compatible clients configuration for objects larger than 5 TiB

AWS S3 limits users to upload objects no larger than 5 TiB. Edge services at Storj don't impose such a limit, but the existence of the limit in AWS S3 requires users to tweak their client's configuration to be able to upload larger objects.

This example is specific to AWS CLI, but your particular S3-compatible client might carry a need for a similar configuration.

A multipart upload requires that a single object is uploaded in not more than 10000 distinct parts. You must ensure that the chunk size you set balances the part size and the number of parts.

For example, for 6 TiB objects, you need to set AWS CLI's multipart_chunksize to approximately 630 MiB:

$ aws --profile storj configure set s3.multipart_chunksize 630MiB
$ aws --profile storj --endpoint-url https://gateway.storjshare.io s3 cp 6TiB_file s3://objects/

$ aws --profile storj configure set s3.multipart_chunksize 630MiB
$ aws --profile storj --endpoint-url https://gateway.storjshare.io s3 cp 6TiB_file s3://objects/

Storj-specific extensions

Object-level TTL

It's possible to specify TTL for the object by sending the

X-Amz-Meta-Object-Expires

header (note: S3-compatible clients usually add the X-Amz-Meta- / X-Minio-Meta- prefix themselves) with one of the following values:

a signed, positive sequence of decimal numbers, each with an optional fraction and a unit suffix, such as +300ms, +1.5h, or +2h45m
- valid time units are ns, us (or µs), ms, s, m, h
- +2h means the object expires 2 hours from now
full RFC3339-formatted date

It's also possible to specify none for no expiration (or not send the header).

AWS CLI example

$ aws s3 --endpoint-url https://gateway.storjshare.io cp file s3://bucket/object --metadata Object-Expires=+2h
upload: ./file to s3://bucket/object

# or

$ aws s3 --endpoint-url https://gateway.storjshare.io cp file s3://bucket/object --metadata Object-Expires=2022-05-19T00:10:55Z
upload: ./file to s3://bucket/object

$ aws s3 --endpoint-url https://gateway.storjshare.io cp file s3://bucket/object --metadata Object-Expires=+2h
upload: ./file to s3://bucket/object

# or

$ aws s3 --endpoint-url https://gateway.storjshare.io cp file s3://bucket/object --metadata Object-Expires=2022-05-19T00:10:55Z
upload: ./file to s3://bucket/object

GET /?attribution HTTP/1.1
Host: gateway.storjshare.io

GET /?attribution HTTP/1.1
Host: gateway.storjshare.io

Response Syntax

HTTP/1.1 200
<?xml version="1.0" encoding="UTF-8"?>
<ListAllMyBucketsResult>
   <Buckets>
      <Bucket>
         <Attribution>string</Attribution>
         <CreationDate>timestamp</CreationDate>
         <Name>string</Name>
      </Bucket>
   </Buckets>
   <Owner>
      <DisplayName>string</DisplayName>
      <ID>string</ID>
   </Owner>
</ListAllMyBucketsResult>

HTTP/1.1 200
<?xml version="1.0" encoding="UTF-8"?>
<ListAllMyBucketsResult>
   <Buckets>
      <Bucket>
         <Attribution>string</Attribution>
         <CreationDate>timestamp</CreationDate>
         <Name>string</Name>
      </Bucket>
   </Buckets>
   <Owner>
      <DisplayName>string</DisplayName>
      <ID>string</ID>
   </Owner>
</ListAllMyBucketsResult>

Example

This sample code works with the AWS SDK for Go and derives from ListBuckets a call to ListBucketsWithAttribution.

package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/aws/credentials"
	"github.com/aws/aws-sdk-go/aws/request"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/s3"
)

type BucketWithAttribution struct {
	_            struct{}   `type:"structure"`
	CreationDate *time.Time `type:"timestamp"`
	Name         *string    `type:"string"`
	Attribution  *string    `type:"string"`
}

type ListBucketsWithAttributionOutput struct {
	_       struct{}                 `type:"structure"`
	Buckets []*BucketWithAttribution `locationNameList:"Bucket" type:"list"`
	Owner   *s3.Owner                `type:"structure"`
}

func main() {
	// Note: YOUR-ACCESSKEYID and YOUR-SECRETACCESSKEY are example values, please replace them with your keys.
	creds := credentials.NewCredentials(&credentials.StaticProvider{
		Value: credentials.Value{
			AccessKeyID:     "YOUR_ACCESSKEYID",
			SecretAccessKey: "YOUR_SECRETACCESSKEY",
		}})

	ses := session.Must(session.NewSession(aws.NewConfig().WithCredentials(creds).WithRegion("eu1").WithEndpoint("https://gateway.storjshare.io")))
	svc := s3.New(ses)

	op := &request.Operation{
		Name:       "ListBuckets",
		HTTPMethod: "GET",
		HTTPPath:   "/?attribution",
	}

	output := &ListBucketsWithAttributionOutput{}

	req := svc.NewRequest(op, &s3.ListBucketsInput{}, output)

	if err := req.Send(); err != nil {
		panic(err)
	}

	fmt.Println(awsutil.Prettify(output))
}

package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/aws/credentials"
	"github.com/aws/aws-sdk-go/aws/request"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/s3"
)

type BucketWithAttribution struct {
	_            struct{}   `type:"structure"`
	CreationDate *time.Time `type:"timestamp"`
	Name         *string    `type:"string"`
	Attribution  *string    `type:"string"`
}

type ListBucketsWithAttributionOutput struct {
	_       struct{}                 `type:"structure"`
	Buckets []*BucketWithAttribution `locationNameList:"Bucket" type:"list"`
	Owner   *s3.Owner                `type:"structure"`
}

func main() {
	// Note: YOUR-ACCESSKEYID and YOUR-SECRETACCESSKEY are example values, please replace them with your keys.
	creds := credentials.NewCredentials(&credentials.StaticProvider{
		Value: credentials.Value{
			AccessKeyID:     "YOUR_ACCESSKEYID",
			SecretAccessKey: "YOUR_SECRETACCESSKEY",
		}})

	ses := session.Must(session.NewSession(aws.NewConfig().WithCredentials(creds).WithRegion("eu1").WithEndpoint("https://gateway.storjshare.io")))
	svc := s3.New(ses)

	op := &request.Operation{
		Name:       "ListBuckets",
		HTTPMethod: "GET",
		HTTPPath:   "/?attribution",
	}

	output := &ListBucketsWithAttributionOutput{}

	req := svc.NewRequest(op, &s3.ListBucketsInput{}, output)

	if err := req.Send(); err != nil {
		panic(err)
	}

	fmt.Println(awsutil.Prettify(output))
}